minolta cf 2002

[time2fly]

remove the transfer belt and clean the AIDC sensors. The front sensor aligns the magenta /yellow and the rear aligns the black and cyan. Also cleck that the slide plate that covers the sensors is being opened by the white lever.

This will give you P codes and misalignment that you have discribed

Wow finally someone got it right, I would even go as far as replacing that unit. Pepper does have an interesting thought but it seems to me that one would have colors mixed together if the IU's got mixed up.

[mrwho]

remove the transfer belt and clean the AIDC sensors. The front sensor aligns the magenta /yellow and the rear aligns the black and cyan. Also cleck that the slide plate that covers the sensors is being opened by the white lever.

This will give you P codes and misalignment that you have discribed

That's a very interesting info! Although I always knew what those sensors did, I never imagined that the front sensor and the back sensor aligned different colors.

Although I wasn't the one with that problem, thanks very much on the insight. One question, though: does that also apply to more recent Konica Minolta machines (C450, C250, etc)?

Cheers!

[dudley]

Yes it applies to all of the machines from the 2001- 650

[ASIM44]

I have a installation problem with a colour minolta cf 2002 in windows xp.plz help me.if some one have jpg format of installation plz send to me.

[tmaze01]

can u plz briefly discribe where the aidc sensors are

[tmaze01]

i READ YOUR SUGGESTION AND IT WORKED / THANK YOU VERY MUCH. TAYLOR

Wow finally someone got it right, I would even go as far as replacing that unit. Pepper does have an interesting thought but it seems to me that one would have colors mixed together if the IU's got mixed up.