Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
Konica Minolta Fax 2900
This machine is giving me a error light every time it spits out a piece of paper and states "wrong paper size" I have letter paper loaded and its programmed for letter paper. Any ideas would be appreciated.
-
Trusted Tech
50+ Posts
- Rep Power
- 31
hi try your take up unit ..there are sensors actuators that are messing around..
-
Technician
- Rep Power
- 31
The paper sensor is set between two plastic plates which are held together by two push together luggs one on each end, try pushing these back together. You can get at them from underneath after removing scanner from top and all screws both side of metal sides which hold black plastic plates.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks