+ Reply to Thread
Results 1 to 3 of 3

Thread: bizhub 750 jamming

  1. 05-21-2009 #1
    manuelcorrea
    manuelcorrea is offline
    Junior Member manuelcorrea is on a distinguished road
    Join Date
    May 2009
    Location
    McAllen,Texas
    Posts
    8
    Rep Power
    0

    bizhub 750 jamming

    I have a bizhub 750 that is consistently jamming with a 3202 or 3201 jam code.Already replaced one-way gears in fusing unit,also tried ADU board with no luck. Also replaced sensors ps 30 and ps 37.Copier has 2.2.mil. on it .Any suggestions. THANKS
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
  2. 05-21-2009 #2
    minimerlin
    minimerlin is offline
    KonicaMinolta Engineer 100+ Posts minimerlin is on a distinguished road minimerlin's Avatar
    Join Date
    Nov 2007
    Posts
    243
    Rep Power
    7
    Anti curl roller? Or damaged mylars on ADU entry?
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
  3. 05-22-2009 #3
    manuelcorrea
    manuelcorrea is offline
    Junior Member manuelcorrea is on a distinguished road
    Join Date
    May 2009
    Location
    McAllen,Texas
    Posts
    8
    Rep Power
    0

    bizhub 750

    anti-curl roller looks to be in good condition.I noticed registration rollers had a flat spot so i replaced them.Will return today and check jam counter.
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
+ Reply to Thread
« Bizhub 600 NVRAM Reset | IU Reset Problems / C352 »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules