Bizhub C350 with Fiery x3e 22c-KM

[mrwho]

Someone posted on this forum a while ago a .PS file that would enable you to recover the Fiery admin password - I never used it, so I don't know if it works. But you could search the forum - it's somewhere out there.

[pajeroid]

No my password is Fiery.1 still (capital F) but the hard drive is corrupt so I need the actual discs. They are like rocking horse poo.

[Gustavo Castro]

If you have another fiery you can Clone de hardisk. You can use Acronis or Norton Ghost to do that. If you need help send me an email gcastro@arnet.com.ar

[pakalo]

Hi dear guys,
excuse me for ma bad English but here in Italy our schools are very bad.

OK, I know this:

On DEVELOP QC2235+ &/or KM Bizhub C350 Admin Password, by default is "0000".

If the Machine Admin Password was changed, you can reset it at default state in the Tech. Rep. Mode (Uty->Counter->Stop 0 0 Stop 0 1, Admin Setting).

The Fiery X3e-22, by default doesn't have any password,
just press the Fiery logo at the bottom of machine's display for entry.

If you power on the machine, after 4min you can see the Fiery logo at the bottom of display ?
If not, 90%, X3e-22's 2,5" HDD is damaged, you must change it & rebuild EFI System Fiery v.2.0.

Or you can see "System Booting, Please Wait" Everytime ?? (Efi System Destroyed)
you must rebuild EFI System Fiery v.2.0.

If on Xe3-22 settings, the parallel port is DISABLE, don't worry, for rebuid EFI System Fiery is not a problem.

If you send to me your @mail, I can send you, privately, a link for download for X3e-22CM: BOOT.INI, SYSTEM.INI & Various Patches (My personal FTP-Server)
Ciao ciao & best regards.

[Gustavo Castro]

Thanks for the info. My personal email is gcastro@arnet.com.ar.

[central1]

We are having similar problems. System Booting comes up, never gets past that. Prior to this we had mailboxes disappearing, files taking longer and longer to process. I'd like to first try just rebuilding the system, if that doesn't work reinstalling on a new drive. If you have the files I need to do that, could you send a link or the files to david@centralfileinc.com?