+ Reply to Thread
Results 1 to 2 of 2

Thread: Konica 1112

  1. 07-06-2009 #1
    tangofox
    tangofox is offline
    Junior Member tangofox is on a distinguished road
    Join Date
    Jul 2009
    Location
    Crema
    Posts
    1
    Rep Power
    0

    Konica 1112

    Someone can help me for changing upper rule of my Konica 1112?
    Which steps? Which path?
    I'm waiting, thank ( I apologize for my english, I'm italian)
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
  2. 07-07-2009 #2
    crm.84
    crm.84 is offline
    Technician crm.84 is on a distinguished road
    Join Date
    Mar 2009
    Posts
    12
    Rep Power
    3
    Replace upper fuser roller? Open clamshell and remove drum carriage. Remove metal plate above fuser(2 screws) and small metal plate located on front of machine next to fuser(1 screw). Disconnect thermistor wire and two wires to fuser lamp. Upper roller assembly is hinged so swing it up and back toward the exit side of machine and then lift it straight up. Lower roller stays in machine. Upper roller comes out just about like all the others.
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
+ Reply to Thread
« C-2840 on C6500 | Subject: minolta di 3510f »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules