Thanks:
0
Likes:
0
Dislikes:
0
-
error codes
konica minolta bizhub 420 error code T82 after a fax has been attempted.
Thanks in advance
Ken
-====-
-
Are you sure it is an error code? From what I know, the error codes for fax are formated like this C-Bxxx
-
error codes for fax
Don't know, it was reported via email by a user and the machine is in another building.
I went to look and the code was gone from the display, so I suspect since it was a new user, they were the error.
Thanks,
Ken
-====-
-
T82 is a no answer code reported by the fax. Problem with other fax no answer, not dialed correctly. Need to dial a 7 or 9 or other access code before phone number. That kind of thing.
-
Trusted Tech
50+ Posts
- Rep Power
- 33
Im getting this 2 on a c250, The fax board works on ourmachine, but when In the it nec25c2 or whatever, it just sits after making a fax, and says waiting in the job log screen, coding out to a
t-82 (T82 Call control Answer tone (CED/DIS) waitingtimeout after dialing at calling)
IT was in this machine for years, going to check phone line today but wierd stuff
-
Technician
- Rep Power
- 32
possible solution
Although this was on a C203 the fax systems are probable similar
Problem: at a new installation
Fax error T82 when sending a fax long distance with a Pause and then user code
example: 914507561748P607
on Activity Report - Result = No Answer
Solution: Dialing Method was "20 pps"
it should have been "PB"
Utility - Admin.Settings - Fax Settings - Line Parameter Settings - Dialing Method = PB
Last edited by chexin51; 11-09-2009 at 06:34 PM.
Reason: additional info
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks