Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: error codes

  1. #1
    Junior Member
    Join Date
    Aug 2009
    Location
    Blacksburg, Virginia
    Posts
    2
    Rep Power
    0

    error codes

    konica minolta bizhub 420 error code T82 after a fax has been attempted.
    Thanks in advance
    Ken
    -====-


  2. #2
    Field Supervisor 500+ Posts
    error codes

    ni311's Avatar
    Join Date
    May 2008
    Posts
    662
    Rep Power
    28
    Are you sure it is an error code? From what I know, the error codes for fax are formated like this C-Bxxx

    Konica Minolta Bizhub Reset - http://www.bizhubreset.com
    Drum and Toner Chip Reset - http://www.chipreset.eu
    Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu

  3. #3
    Junior Member
    Join Date
    Aug 2009
    Location
    Blacksburg, Virginia
    Posts
    2
    Rep Power
    0

    Thumbs down error codes for fax

    Don't know, it was reported via email by a user and the machine is in another building.
    I went to look and the code was gone from the display, so I suspect since it was a new user, they were the error.
    Thanks,
    Ken
    -====-


  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    977
    Rep Power
    30
    T82 is a no answer code reported by the fax. Problem with other fax no answer, not dialed correctly. Need to dial a 7 or 9 or other access code before phone number. That kind of thing.


  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Location
    Arcata, CA
    Posts
    63
    Rep Power
    21
    Im getting this 2 on a c250, The fax board works on ourmachine, but when In the it nec25c2 or whatever, it just sits after making a fax, and says waiting in the job log screen, coding out to a

    t-82 (T82 Call control Answer tone (CED/DIS) waitingtimeout after dialing at calling)

    IT was in this machine for years, going to check phone line today but wierd stuff


  6. #6
    Technician
    Join Date
    Aug 2008
    Location
    Quebec
    Posts
    37
    Rep Power
    21

    possible solution

    Although this was on a C203 the fax systems are probable similar

    Problem: at a new installation
    Fax error T82 when sending a fax long distance with a Pause and then user code
    example: 914507561748P607
    on Activity Report - Result = No Answer
    Solution: Dialing Method was "20 pps"
    it should have been "PB"
    Utility - Admin.Settings - Fax Settings - Line Parameter Settings - Dialing Method = PB

    Last edited by chexin51; 11-09-2009 at 06:34 PM. Reason: additional info

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •