Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Aug 2009
    Location
    Manhattan
    Posts
    11
    Rep Power
    19

    Pls Help ... Konica Minolta Di 200 c0500 error

    Hi all Have a Di 200 with error code c 0500 (Low Fuser heat).
    I checked the Fuser Lamp, Thermal Fuse, Thermal Swith and Thermister. All Tests Good. After resetting (The little Hole on the top right hand side of the copier) it goes back to c-0500. Is there someone that can help me with this problem and is there something I'm over-looking?

    Customer said they were making copies when the machine caught the code.

    Thanks in advance.


  2. #2
    Technician PaperCut's Avatar
    Join Date
    Sep 2008
    Posts
    17
    Rep Power
    21
    On the control panel, Check the right side of the panel if there a hole, and press it w/ a paper clip, it will reset the code, if not. It need a new fuser unit


  3. #3
    Senior Tech 250+ Posts
    Join Date
    Oct 2008
    Location
    Long Island, NY
    Posts
    256
    Rep Power
    23
    Pressing the reset switch alone will not reset this code. After pressing the switch, wait until a small dot appears on the left side of the touch screen. Then press 3 and you will get a new screen. Press Trouble Reset.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Feb 2008
    Posts
    150
    Rep Power
    23

    Thumbs up B 350

    press reset button on the side wait for a dot to appear on the left side of the display. press 3.enter admin code the machine will display a window with trouble resset option.press trouble resset.after resseting swicht off the machine and wait for 10 seconds and swictch on .trouble shoulb be gone.problem caused by power flactuation


  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Sep 2008
    Location
    Lucknow,India
    Posts
    57
    Rep Power
    21
    thuo is right Enter service code instead of admin code that is normally eight time zero (00000000).


  6. #6
    Senior Tech 100+ Posts Si@danwood's Avatar
    Join Date
    Mar 2008
    Location
    leicester
    Posts
    154
    Rep Power
    23
    Quote Originally Posted by vijaysharma View Post
    thuo is right Enter service code instead of admin code that is normally eight time zero (00000000).
    when you have done this and got the machine running you may want to check the lamp contacts and electrodes and also check the VT door sw is making good contact
    Si


  7. #7
    Technician
    Join Date
    Aug 2009
    Location
    Manhattan
    Posts
    11
    Rep Power
    19

    Smile Thanks all...Minolta 0500 code Di 200

    I did the reset (Held small hole on side, wait for small dot on display panel, pressed 3 and pressed trouble reset). and bingo there was light. My book had a mis-print in it, I would have been there for ever.

    There has been alot of Power Failures in this area lately so the thuo theory may have been rite. However, the side door is broken on the side where the VT Door Switch is and 0500 code so Si's theory could be rite as well. I repaired that but don't know if it's going to hold.

    Does anyone know where I can get a Side Door?

    Anyway, thanks to all that replied...anything I could ever do for you guys just let me know. Midnightrun7@gmail.com Nick


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •