Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 31
Excessive Jamming of Cardstock in C6501
I have an OCE CS665 (KM 6501) for 2 months. We have a crazy amount of jams when feeding card stocks.
My default card is a 280gsm Productolith 12PT C2S 13 x 19 (330 x 485mm) . It jams every 20 sheets - if im lucky - running in the bypass. We are cleaning the feed tires with rubber renew. I've also tried a 10PT C2S - 250gsm -- running in tray 3 -- it jams -- i cant even duplex 1 sheet without jamming. I've tried other stocks -- still issues. Jams on anything more than 200 gsm coated.
Its driving my production manager crazy. I've talked to the techs -- and they keep asking if my paper is in spec -- which it is.
Does anyone have any suggestions. We've cleaned the roll tires.. the techs keep changing the feel tires. We've only put 100000 clicks on the machine they have replaced the tires more than 5 times and we are having to clean with rubber renew every 15 minutes of running time. Its CRAZY!!!!!
Thanks
-
If you bought this machine without a PF unit or an LCT then you are completely insane. The bypass tray is like an appendix, it serves no purpose, and evolution has left it there. Your techs can change tyres until the cows come home it will not reliably feed from the bypass period.
Don’t bag the tech cause the purchaser decided to cut corners, for the downtime this will cause the LCT would have well paid for it self.
If you insist on sticking with the bypass my only suggestions is to place some sort of weight on the pickup roller.
-
Technician
- Rep Power
- 31
Not "bagging" the tech... The tech has tried everything. We are not only having issues from bypass ... But from trays too... I would gladly purchase an lct if it would work - and solve the problem. Still it doesn't explain the issues from the main trays --- or are those trays appendages too?
-
Senior Tech
100+ Posts
- Rep Power
- 33
the 3 trays on the main body and the bypass tray are ideal for feeding plain paper, can feed some heavier stocks, but not reliably, esp. over a long period of time.
The LCT does a bit better with thicker stocks, but I would highly recommend purchasing the PFU. Its a work horse of a paper feed unit.
As with feeding any thick stocks of paper, the feed tire life will be cut in half or more on any tray you decide to get or use.
-
Technician
- Rep Power
- 31
Yes i agree the bypass looks nice and folds up and down but to use it then it nots going to make you life easy. The LCT is the only way to go and actually the larger dual paper trays are even better and they even hide that bypass so you can see or use it again.
-
Trusted Tech
50+ Posts
- Rep Power
- 35
first off , throw that damn rubber renew away, it will totally screw the feed tires and make them brittle. I use GooGone as it isn't as hard on the rollers. Also make sure that the rollers after the feed rollers are clean(access from the bottom of the adu. If you have used rubber renew on these, they are probably screwed. The rollers in a copier are not the same as a press
GooGone Goo Gone 4oz Bottle
There is an adjustment for the seperation roller pressure , if you increase the pressure it will help a little( 2 brackets thet the seperation springs attach. Then go to a hobby shop and ask for dubro stick on weights for balancing rc airplanes or a tire shop for stick on tire weights and add about 1/4 to 1/2 oz on the top of the take up rollor frame to give more pressure on the take up roller. You may have to adjust the spring pressure that is used to raise the feed roller back up(its the screw in the slotted hole to the rear of the tire assembly)
Also make sure of the grain of the stock, it should be flexable in the feed direction. If you are getting cut then make sure that its the right direction. Give the machine a fighting chance(we went through hell on one account only to find that it was the wrong direction)
-
Just one word of caution. Don't put too much weight on the pickup roller. I did this once, worked great but I put so much weight on the pick-up roller could not retract and the ADU could'nt be pulled out, hilariouse.
-
Trusted Tech
50+ Posts
- Rep Power
- 35
Ya been there done that one, 1/4 to 1/2 oz is about all you can do, If you get the dubro weights then 2 of the squares is the max you can use
-
Senior Production Tech
100+ Posts
- Rep Power
- 36
RESOLUTE, WHERE ARE THE JAMS HAPPINING? DOES IT EVEN MAKE IT TO THE REGISTRATION ROLLERS? I HAD ALMOST THE SAME ISSUE, IT TURNED OUT TO BE THE ENTRANCE METAL GUIDE BEFORE THE PRE REG ROLLERS WAS BENT UP AND THE RUBBER ROLLER WERE NOT TOUCHING THE PLASTIC ROLLERS ON TOP. SIMPLE TEST PULL ADU OUT AND TURN THE ROLLERS ON THE FAR RIGHT.
-
Senior Tech
100+ Posts
- Rep Power
- 34
Tex is quite right although he doesnt need to shout about it(switch caps off next time bro)..Si
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks