Bizhub C351 admin password resets?

[mitchl]

Thank you...It worked....now I just need to figure out how to remove the color copy restriction

Hmmmm...... One would assume that its in ADMIN mode, try this......Under general see if "authentication is turned on, if so turn it off and see if that doesn't get you going

Subject:
How to allow Public User Access, but restrict Public User functions.
Description:
How to allow Public User Access, but restrict Public User functions.
Solution:
To allow Public User Access, but restrict Public User functions, perform the following:
1. From the copier/printer panel, enter Admin Mode. Select User Auth/Acct Track.General settings
2. With User Authentication set to ON, set Public User Access to Allow.
3. Click OK
4. Select the User Registration button. Select the Up arrow.
5. Next to a box with the number 1000 is a box numbered 000. It is also labeled Public.
6. Select this box.
7. Select Function Permission to Allow or Restrict the following functions - Copy, Scan, Fax, Print, User Box or Print Scan/Fax from Box.
8. Select the Output Permission Box.
9. Select Allow or Restrict for Print Color, Print Black and White or Scan/Fax Color or Black and White.
Note: The Output Permission selection is not available with base firmware. Firmware must be updated to minimum version 81 for the bizhub C250 or minimum version A7 for the bizhub C351/C450 to allow the setting change.

[edwin3268]

Thank you again!!....This is a complicated machine....I think I do need a service manual.

[mitchl]

Thank you again!!....This is a complicated machine....I think I do need a service manual.

Jeez what ever would give you that impression! I'll start sending to you in chunks have a good weekend!

[fuser fingers]

You guys ROCK!

Thanks for solving this for me.

[nasspro]

Hmmmm...... One would assume that its in ADMIN mode, try this......Under general see if "authentication is turned on, if so turn it off and see if that doesn't get you going

Subject:
How to allow Public User Access, but restrict Public User functions.
Description:
How to allow Public User Access, but restrict Public User functions.
Solution:
To allow Public User Access, but restrict Public User functions, perform the following:
1. From the copier/printer panel, enter Admin Mode. Select User Auth/Acct Track.General settings
2. With User Authentication set to ON, set Public User Access to Allow.
3. Click OK
4. Select the User Registration button. Select the Up arrow.
5. Next to a box with the number 1000 is a box numbered 000. It is also labeled Public.
6. Select this box.
7. Select Function Permission to Allow or Restrict the following functions - Copy, Scan, Fax, Print, User Box or Print Scan/Fax from Box.
8. Select the Output Permission Box.
9. Select Allow or Restrict for Print Color, Print Black and White or Scan/Fax Color or Black and White.
Note: The Output Permission selection is not available with base firmware. Firmware must be updated to minimum version 81 for the bizhub C250 or minimum version A7 for the bizhub C351/C450 to allow the setting change.

Hello,

How can I update my c351 firmware?


rgds

[mitchl]

Hello,

How can I update my c351 firmware?


rgds

You need a 128meg flash card and the bin files for the C351, once you have those its a breeze!

[nasspro]

You need a 128meg flash card and the bin files for the C351, once you have those its a breeze!

Where can I find the bin files for C351 ???

[mitchl]

Where can I find the bin files for C351 ???

send me an email mitchL@akitacopy.com and I'll have our IT guy post it on our FTP and he will get you a Screen name and password to retrieve it.

[nasspro]

send me an email mitchL@akitacopy.com and I'll have our IT guy post it on our FTP and he will get you a Screen name and password to retrieve it.

Mail sended !