Bizhub C352 fuser

[mrwho]

You can reset it with a fuse (you can find it inside the fuser unit, somewhere near the connectors - just take out the covers and look for it).

EDIT: Check this thread.

[saidva]

I think I figured out what happened to the missing white connector. After some further discussion with the boss, it turns out that I didn't have the story exactly right.

When the tech removed the fuser from the machine, he opened the front panel and disconnected the heater wires. But he didn't know where the other panel to unplug the white connector was. (I didn't know either, but I had the good sense to ask.) So after disconnecting the other wires, he just yanked the fuser out of the machine. The white connector popped out (despite the small latch on it) but it wasn't damaged. So far so good.

But now he had to install the new fuser in the machine -- and he couldn't do it. He wanted to plug the cable in first and then put the fuser in the machine, but the cable isn't long enough. And if you put the fuser in first, then you can't reach the cable because the fuser's in the way.

So he needed a longer cable, and that's when he decided to get creative. And that's where the connector and the cable went -- after he botched the splice job, he probably just took the remains of it with him. But he left the new fuser in the box (without the connector), because we had paid for it, and we would have noticed if it was gone.

So I ordered a new fuser, and after it's installed and working I'll take the new and old fusers apart and see if I can make one good one out of them. But not until the machine is working -- I'm somewhat more prudent than that moron.

-- Doug McNeil

[pepper38_cnd]

Thanks for filling in the gaps! I hope he learned from his mistakes, at least you did.

[mitchl]

I should have just posted a picture of it to avoid all this!

[pepper38_cnd]

mitchl is right! A pictures worth 1000 words.

[mitchl]

I just read back up the thread and cant stop laughing, I know its not funny but good god!

[saidva]

Well, you know, sometimes a series of events is so ridiculous that you just have to laugh about it, even if it happens to you. I'm glad you got a good laugh from it (I wrote it to be funny), and I hope that others did too. Ah, life in the trenches.

So now it's the weekend, and I'm just back from a week's vacation, and my new fuser should be there when I get in to work on Monday. I'll install it first thing (using the correct procedure, needless to say), so the machine won't be asking for it anymore.

And I'll let you all know how the reconstruction comes out. I actually have two old fusers that are near the end of their lifespans (we never throw anything away), so I can cut one apart and leave the other intact, as an exemplar to guide me. (I still don't know if the guy cut the wires or just disconnected them, or what.) And if rebuilding it (offline) doesn't work, then the copier will still be running, so nothing is lost. And if it does work, then I'll save the company 400 bucks.

So thank you for your kind comment, mitchl -- I was hoping that you guys could laugh about this.

And thank you to all of the rest of you, for all of your help -- it was invaluable. I'll let you guys know how this thing comes out.

-- Doug McNeil

[mrwho]

You do that. Good luck!

PS: Vacations, eh? You lucky bastard!