Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician
    Join Date
    Aug 2009
    Location
    Famke, Pa
    Posts
    12
    Rep Power
    30

    Question C500 Error codes

    can someone send me a error code PDF list for Bizhub c500,

    or any information on sc34-01.

  2. #2
    Trusted Tech 50+ Posts Mikey's Avatar
    Join Date
    Sep 2009
    Location
    Riyadh
    Posts
    54
    Rep Power
    30

    Konica Minolta C500 sc32-01

    For sc 32-01 check the fixing cooling fan 1 & 2. There may be abnormality in the detection signal on either of them continuously for specific time.

    For sc34-01 you may have problem with high temperature. Check TH1 in the fixing unit.

  3. #3
    Service Manager 5,000+ Posts
    C500 Error codes


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153
    This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
    from The Internet's largest collection of manuals


    Paul@justmanuals.com

  4. #4
    Technician
    Join Date
    Aug 2009
    Location
    Famke, Pa
    Posts
    12
    Rep Power
    30
    Quote Originally Posted by Mikey View Post
    For sc 32-01 check the fixing cooling fan 1 & 2. There may be abnormality in the detection signal on either of them continuously for specific time.

    For sc34-01 you may have problem with high temperature. Check TH1 in the fixing unit.

    thanks, but in theory wouldnt it start up after it cools down?

  5. #5
    Trusted Tech 50+ Posts Mikey's Avatar
    Join Date
    Sep 2009
    Location
    Riyadh
    Posts
    54
    Rep Power
    30
    You got a point but first check the thermistor TH1 in the fixing unit. Is it good or bad? Replace if bad. Check the clearance and remove any dirt on this sensor.
    Try this:
    Enter 25 mode press 5 (parts counter). On the part counter menu screen press 1 (count of special parts) then on the parts counter screen select the part that you want to reset. Press Count Reset then press yes.

  6. #6
    Technician
    Join Date
    Dec 2009
    Posts
    22
    Rep Power
    30

    What is thermistor TH 1

    What is thermistor TH 1

  7. #7
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    If you do not know what a thermistor is, call a service tech.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Apr 2010
    Location
    Porto Portugal
    Posts
    144
    Rep Power
    30
    ......!!..

  9. #9
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56
    Quote Originally Posted by doomblack View Post
    thanks, but in theory wouldnt it start up after it cools down?
    Nope, any fuser code locks the machine down and has to be reset.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  10. #10
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56
    Quote Originally Posted by Mikey View Post
    You got a point but first check the thermistor TH1 in the fixing unit. Is it good or bad? Replace if bad. Check the clearance and remove any dirt on this sensor.
    Try this:
    Enter 25 mode press 5 (parts counter). On the part counter menu screen press 1 (count of special parts) then on the parts counter screen select the part that you want to reset. Press Count Reset then press yes.
    This won't help your problem.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here