+ Reply to Thread
Results 1 to 6 of 6

Thread: C253 Problem on 1st Print - Black Scattering

  1. #1
    Trusted Tech 50+ Posts pajeroid is on a distinguished road
    Join Date
    Jul 2009
    Location
    Bradford, West Yorkshire
    Posts
    50
    Rep Power
    2

    C253 Problem on 1st Print - Black Scattering

    Hello - I have a Bizhub C253 that is scattering dev all over the 1st page. We have tried changing the black IU.

    I have attached a PDF example,

    Any ideas?
    Last edited by pajeroid; 10-21-2009 at 12:25 PM.

  2. #2
    JSC
    JSC is offline
    Field Supervisor 100+ Posts JSC is building a good name for himself JSC's Avatar
    Join Date
    Dec 2006
    Posts
    210
    Rep Power
    9
    Quote Originally Posted by pajeroid View Post

    I have attached a PDF example,
    You havn't attached an example.......... Check out the bullitin is this what your getting?

  3. #3
    Senior Tech 100+ Posts Bizhub is an unknown quantity at this point Bizhub's Avatar
    Join Date
    May 2007
    Posts
    127
    Rep Power
    0
    Quote Originally Posted by JSC View Post
    You havn't attached an example.......... Check out the bullitin is this what your getting?

    It will be the board !!! I only wish my handwriting was neater now

  4. #4
    Junior Member rprem is on a distinguished road
    Join Date
    Apr 2009
    Location
    Coimbatore,Tamilnadu
    Posts
    9
    Rep Power
    0

    Thumbs down

    For the first print only its comes or it continues
    after changing the iu also it comes like that ah
    machine yeild ?

  5. #5
    Junior Member minoltaed is on a distinguished road minoltaed's Avatar
    Join Date
    Aug 2009
    Location
    springfield
    Posts
    8
    Rep Power
    0
    We had one doing something that sounds alot like your problem and we had to replace the image control board to fix it. Send the old board in for repair and they fixed it for us.

  6. #6
    Trusted Tech 50+ Posts pajeroid is on a distinguished road
    Join Date
    Jul 2009
    Location
    Bradford, West Yorkshire
    Posts
    50
    Rep Power
    2
    Whoops, didn't realise i'd posted this twice! What a cock! Anyway... The solution is the PRCB board so thank-you very much JSC, Bizhub & minoltaed!

    The post I have been following is C253 Problem on 1st Print - Black Scattering This post does have an attachement. Sorry for the balls-up!

    Thanks once again!

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts