| Quote: | | | | | | | |
| Thanks Big Jase,
that was M charger unit problem,replaced and rectified | |
| | |
Sometimes, the connector in the front can become intermittent from the constant PM cycles where we have to remove the dev unit. I've had to "rewire" the plug a couple times on one machine (different dev units). One of the wires breaks inside the insulating plastic from the wiggling of this connector as its pushed and pulled. Easy to fix and easy to diagnose. Simply give each wire strand a light pull in line with the wire to connector. If the insulation stretches, there is a break. If not, the wire is ok. I habitually check this every time I do a dev restart or replace the dev.
C-2452 error 
If at First you don't succeed remove all evidence of ever trying!
Linear Mode
