Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jan 2009
    Location
    Timisoara
    Posts
    40
    Rep Power
    31

    IP601 on Konica 7075 error SC 56-04

    I have some konica 7075 and 7085 copiers with ip601 and ip602 print controllers and some of them won`t initialize the controller as it gaves error code SC 56-04. Can`t find error code in SM and don`t know what tot do.
    What I did till now:

    1. Rewrite firmware on IP601 and IP602 - no result;
    2. Change Firewire Board on IP controller - no result;
    3. Change Fireware cabble between copier and IP controller - no result;
    4. Change Fireware Board from the copier - no result;
    5. Plugged firewire cable directly in firewire board - no result;
    6. Plugged an Monitor in IP controller and seems VxWorks software that is installed on IP controller works fine;
    7. Tried with other IP controller - no result;
    8. The copier and controller worked great until few days ago;
    After all those changes still gaves SC 56-04 error code. Any suggestions?

    Thank you.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jun 2008
    Posts
    192
    Rep Power
    34
    Solution ID TAUS0622503EN* Solution Usage 5
    Description
    SC56-04 at power up when the IP602 is installed. The print controller works properly on a different 7085.
    Solution
    CAUSE: The machine serial numbers are incorrect or not entered.
    SOLUTION: Properly enter the serial numbers using the 25 mode.

    ..............................

    Solution ID TAUS0621916EN* Solution Usage 0
    Description
    Code 56-04.
    Solution
    CAUSE: Incorrect IP unit connected.
    SOLUTION: The correct IP unit for the model 7085 is the IP602. No other IP units are compatible with the model 7085

    .....................
    Solution ID TAUS0646053EN* Solution Usage
    Description
    SC56-04 on the printer.
    Solution
    PROBABLE CAUSES:
    1. The SC56-04 service code is generated when a new memory board is installed and the copier serial number information is not entered.
    Re-enter the serial number after the memory board has been properly installed and reset. The new memory board must be initialized and the serial number
    information must be re-entered into the copier. Please refer to attached bulletin 3613 for details.
    2. If an optional print controller has been installed, SC56-04 may indicate a communication problem between the print controller and the IFB (Controller
    Interface Board) or between the IFB and ICB (Image Control Board).
    Re-seat the connectors on the ICB.
    3. The code sometimes indicates a communication problem between the operation panel and the ICB. If the copier/printer functions normally, except when printing from the controller, the problem is most likely related to the Interface Board.
    Re-seat the connectors on the ICB and the operation panel. Verify that the copier/printer has current firmware. If a controller is attached, make sure that the
    controller power cord is plugged into the power receptacle inside the copier/printer. Please see attached bulletin 3097 for details. If the code persists, reload
    the PRCB firmware and the ICB firmware. It is also possible that the ICB (p/n 56QA-9010 ) or IFB (p/n 65AA-9120) may need to be replaced.


    Hope this helps

  3. #3
    Technician
    Join Date
    Jan 2009
    Location
    Timisoara
    Posts
    40
    Rep Power
    31
    Ok thank you for replay. I`ll give it a try and let you know.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here