Minolta 3102 Need Imaging, Fuser & Transfer stuff

[captain1976]

Does anyone have either the components to rebuild or have rebuilt ready-to-go units? I will need a few of each

[fixthecopier]

I have 2 brand new 2002s still in the box, sans the print controllers. If you are serious, I may be able to sell you both for a good price. $1700 each, you pay shipping. I would have to get an OK from the owner.

[texasatm12]

Does anyone have either the components to rebuild or have rebuilt ready-to-go units? I will need a few of each

I sell brand new fuser for the konica minolta color copiers on ebay texasatm12 user name 4588-513 fuser cf2002 3102. mark

[captain1976]

I have 2 brand new 2002s still in the box, sans the print controllers. If you are serious, I may be able to sell you both for a good price. $1700 each, you pay shipping. I would have to get an OK from the owner.

Great, send me an email and tell me where you are located.

alfischer1@juno.com

[Titan1969]

not sure if you know but you can chip the IU and fuse the belt and fuser. All depends on copy quality. Fusers go 2-3 times rated life and belts 2x life usually.

[captain1976]

Yes, I am aware of this but do you know anyone who does this or has the programmer?

Thanks

[Titan1969]

Katun will supply the chips pre-programmed. Rebuild kits are N/A. If you find them let me know. I even tried to find drums to slap in to an otherwise good IU...no luck.

[captain1976]

Katun will supply the chips pre-programmed. Rebuild kits are N/A. If you find them let me know. I even tried to find drums to slap in to an otherwise good IU...no luck.

Thanks, Appreciate he info

[condorloco]

Can you provide instructions on how to fuse the belt and fuser??
This is my first post but I must say thank you to all who post in this forum.

[manuals4you]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com