di 7210

[arisalonica]

Hello everybody,

I have intermittent jam's at the EDH on the registration rollers.
I have replace the feed rollers,cleaning the registration rollers,adjust the loop but nothing help.
Any help please?
Thank's in advance.

[hachetman]

Hello everybody,

I have intermittent jam's at the EDH on the registration rollers.
I have replace the feed rollers,cleaning the registration rollers,adjust the loop but nothing help.
Any help please?
Thank's in advance.

I have seen the bushings on the feed shafts get gumed up and cause the paper to feed slow and trip a jam code Hope this helps

[minimerlin]

Hello everybody,

I have intermittent jam's at the EDH on the registration rollers.
I have replace the feed rollers,cleaning the registration rollers,adjust the loop but nothing help.
Any help please?
Thank's in advance.

Check the one way clutches on the take up and feed area shafts. I also have had problems with jams caused by the top cover micro switch going high ( the little one under the cover at the front)

[bizhub1]

I agree with the one way gears on the back side of the rdf, I have had to replace them quite a bit

[arisalonica]

Thank's all of you guys..
I' ll try the suggestions and hope to solve the problem.