cf9001 Problems again

[cyber61]

I have the same problem.

engine downloading completed
check sum
I.R.
N.G.



did you solve it?

I got the problem after the power plug was unplugged for a while (2 days)
Fiery is working and I get a connection but the hardware does not work.

...please HEEEELP.


THX a lot

[cyber61]

I have the same problem.

engine downloading completed
check sum
I.R.
N.G.



did you solve it?

I got the problem after the power plug was unplugged for a while (2 days)
Fiery is working and I get a connection but the hardware does not work.

...please HEEEELP.


THX a lot

[kniezarastislav]

Hello friend,
do you have a service manual for cf9001 please? Would help very much. My printer does not start at all. THX.

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[cyber61]

Hello friend,
do you have a service manual for cf9001 please? Would help very much. My printer does not start at all. THX.

Sorry - no Service manual - but I have got a solution for this problem. You have to download the patch 50371.uxe, connect cf9001 with parallel port, start your engine, press "set", select "install software", at DOS prompt copy 50371.uxe to lpt1 ...and it is fixed. Short description what I am trying to do since 2 month.... - but it doesn´t work ---I GET NUTS!!!!!
Hope you are more successfull - if you are - let me know.
What problem do you have? Maybe I know it.

[kniezarastislav]

Well, my printer was off for few years!!! so when I first started it, the power supply fired down, I repaired it, but today, when I started it again, the colour display does not start, but it seems to run - the fiery is on as it displayes on the small display. But the code 08C-M is displayed with the message of checking cable and power.
Does anybody have a suggest what to do?
When I want to print a test page, it displayes RIP What does it mean???
THX.