same 25 mode but this time set switch 18-0 to off
same 25 mode but this time set switch 18-0 to off
Thank you very much. The problem is solved with 18-0. Great help
hi
dear its PRCB (printer control board) has been damaged. when you will replace it and you will also give the serial no of this machine to its memory and this way your problem will remove.
regards,
nisar khan
Pakistan
HI
My copier colorforce 8050 prints very dark even setting up from the document printer set up mode to 85% bright. Moreover, the blue is printed purplish. Is there any set up to reduce the darkness of colors for digital printing. thanks
I did not get any response from anyone yet. Would anyone let me know how to caliberate the colors. My machine colorforce 8050 is printing dark and blue is purplish.
1st have you cleaned p / heads/m-c grid & wiress/,
2ed is the problem off the glass or print' if print are you useing comand work ststion,
3rd what dose the density out put charts look like
4th do you have a s/man i can just give you page #'s other wise there's a lot of typing
1. Yes
2. both
3. printed a test chart. The Blue and Magenta seems ok but the yellow is greenish and black is reddish.
4. I dont have sm for this particular model but have some other manuals. I don't know which other machine is compatible with colorforce 8050.
Bookmarks