Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 31
Thanks scallanjoe@yahoo.com. I received the catalog. Now I would like to know how I can caliberate colors. Is there any automatic caliberation. As I said in my previous posts, my machine is printing dark and blue is purplish. I printed the test page and the yellow is greenish, black is not pure black, (its gradation is reddish) and the gradation of cyan and magenta are also different. I am sending you scanned copy of the test page for review and instructions. thanks
Attachment 4023
-
Trusted Tech
50+ Posts
- Rep Power
- 30
ok
1st let's send all attachments to my yahoo e/mail
how let's do a test pattern for density of ea. color / section 7.6 of the s/man
do ea color from 256 / 175/ 65
how this should help to isolate area of problem
this is also asumeing / crona grids & ass, are clean, a long with the belt /cleaning unit / transfer rolers ea color
behind the belt/ drumes are good /also developer and toner are not of a aftermarket
2ed
adjustments on section 7.2.2//page 1-49
most of the time i had this it was dirty main charge grids or wire//bad cleaning blade//or toner clumping up
and backup mess// p-m due--
good luck
-
Trusted Tech
50+ Posts
- Rep Power
- 28
konica colorforce 8050
I need steps to center images on 8.5x11 sheet & 11x17 both at duplex. Any help will be greatly appreciated.http://www.copytechnet.com/forums/im...cons/icon7.gif
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks