trouble reset procedure
-turn of the copier
-pres and hold utility/counter key until turn on the copier.
-wait …. on the scrren will be see "trouble reset"
-touch "trouble reset"- OK will be see.
-turn off the copier
-wait 10 sec. then turn on the copier.
I can't see "trouble reset on the scrren I wait ... and the error C3451 error apear again
is this a correct procedure for bizhub 250 B/w or it have an other procedur for this series
1-Remove the Compact Flash Cover .
2-Press the Warm Restart Switch .
3-When the "." appears at the center on the left-hand side of the screen, enter "3" from the 10-key pad.
4-Enter the 8-digit service code and touch [END]. Default value:00000000.
5-Select "Trouble Reset" .
if you have e-mail i may send you the bulletin because you have to change first the THERMOSTAT !!!