Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 30
7145
hey guys little help here I dont do konicas usally (ricoh) can anybody tell me how or what a f35-1 is and can it be reset. I will return the favor anytime on a ricoh product thanks
-
From da book:
F35-1 Low fixing temperature abnormality
(L2 burnt out)
When turning on electricity to the
L2 (Fixing heater lamp/1) for
more than the specified period of
time while in idling.
Special reset procedure, lots of posts/threads on how to reset these if/when need be! Search is your friend!
Regards!
A.
-
Trusted Tech
50+ Posts
- Rep Power
- 33
F35-1 reset
1. get in 25 mode turn on sw1 off sw2 turn on sw2 while press 2,5
2. dip sw put 3 bit number put 1 bit data put 0
defective fuser section need repair before resetting
-
Technician
- Rep Power
- 32
Reset on the error code is fine, but first I would advise removing the upper fuser roller and cleaning the T-mistors. That usually prevents a repeat of the code. Good Luck.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks