Konica 7272 sc 23-04

**Naveed Shahid** · 12-07-2009

Hello Every One

I am facing a problem sc 23-04 i changed already pcl but cant solve problem can any one have a idea

thanks in advance

**leo** · 12-08-2009

Measure the ICP(small black IC)fuses on printercontrol-board
i belive one of them are faulty. just soldier an normal glass fuse over the ICP
check the servicemanual for the current

**Naveed Shahid** · 12-08-2009

dear leo

i already open th printer control board but i can't found icp or fuses co can u give a fever confirm me ic name or fuse name i reaaly appciate u
thanks

Originally Posted by leo

Measure the ICP(small black IC)fuses on printercontrol-board
i belive one of them are faulty. just soldier an normal glass fuse over the ICP
check the servicemanual for the current

**leo** · 12-10-2009

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

**Naveed Shahid** · 12-10-2009

thanks for great support i will fininshed problem soon

thanks once again

Originally Posted by leo

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

**chand** · 12-22-2011

Originally Posted by Naveed Shahid

thanks for great support i will fininshed problem soon

thanks once again

hi
did you solve the problem???

**leo** · 12-23-2011

Diego Silva, Great player

**chand** · 02-03-2012

no problem of any board...i solve this problem easily..only hardware problem
contact me chand226@gmail.com

**chand** · 02-03-2012

Originally Posted by leo

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

no problem of any board

**rhalif** · 07-25-2012

I have the same error sc 23-04 with dialta 5510, I tried to change the pcl but it didnt work, I checked also the 3 icp, they all look good, anyone can help me with this ?