Please can someone clarify:
Can you go from V30 C6500 firmware straight to V60 without installing any of the other versions in between; ie does V60 include all the fixes included in any interim versions.
Many Thanks
Please can someone clarify:
Can you go from V30 C6500 firmware straight to V60 without installing any of the other versions in between; ie does V60 include all the fixes included in any interim versions.
Many Thanks
yes, you can,
all bugfixes included in the last version.
greets
mr.propper
Thanks Mr Propper
If you really are at v30 (really old) be very careful about the order in which you install the v60 firmware.
To prevent a possibility of the serial communication buss having a problem start with the peripheral FURTHEST to the left of the machine and work back toward the copier. In the copier do I0 Collective first and then C Printer controller last.
Couple of common problems if one of the elements will not accept firmware:
1. CN19 jumper should NOT be used on any peripheral (except the Perfect Binder when putting firmware in it.)
2. If you have an LS large stacker it is common to miss a plug in the wiring harness on install. Machine will work but no firmware will install downstream. Check the install instructions carefully.
Best Regards from the snow in Connecticut!
Hello iŽneed G00-50 or G00-60 Firmware version and DLBT, for Bizhub C6500.
Thanks.
In some machines (I think with V.25? or V.30) you must replace also Image Board with a newer.
must check.
wanted to say bug-fixes
OK first I send a sausage!!!!!!!!
Bookmarks