The GSR-R6 isn't the magic firmware to look for.
ALL the Gxx-R6 firmware support the P-14 fix (Threshold changed)
On older firmware (J8/R5 etc )
If the skew correction cannot be done ...then the skew control motors go back to home position.
ON R6 firmware the skew control stays at maximum adjustment if outside the range.
from notes
5. When the alert code P-14 is detected after PH and IU are changed, color registration error or skewed image may occur because the skew correction control is not performed.
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
I have this firmware but it isn't free. If you're interested in buying it, email me at paul@justmanuals.com
pls explain it again
that was 4 years ago.
good luck.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks