#10 (permalink) Coptech
Junior Member
Join Date: Dec 2009
Location: Enid
Posts: 4
Rep Power: 0
For future reference, if you turn the fusing drive shaft, the lower roller will drop and release the fusing pressure. At that point, the shouldered screws go in with no pressure at all.
thanks for the info. i haven't checked on those drums counts yet (have to look up the paper work) i brought the fuser to the shop to rebuild and i don't have access to the machine right now. enjoy your white Christ-mas up there, wish i was there i have family near you. What happened to our Sooners this year?
Bookmarks