Thanks: 
Likes: 
Dislikes: same problem i have
guys any solution ?
same problem i have
guys any solution ?
Sure thing buddy!Originally Posted by Mohammad Khurram
The solution is to read the thread (or aquire an interpreter)...
i try these all but still no success
Hi you have yourself one massive job there suggest you uplift this machine and take to your workshop becuase you going to have to strip the entire rear and front section out to get the toner recycling unit out of the machine two things to look for once you got it is the recycing auger clogged or snapped strip out clean or replace, the two gears on the end that links up to drive section are either of them stripped or both have had this before basically comes from waste toner box not being emptied or changed regularly front door is open and closed to fool machine you have mission on hands work carefully you want to reassemble this machine and get it to work properly again good luck buddy
Hi you have yourself one massive job there suggest you uplift this machine and take to your workshop becuase you going to have to strip the entire rear and front section out to get the toner recycling unit out of the machine two things to look for once you got it is the recycing auger clogged or snapped strip out clean or replace, the two gears on the end that links up to drive section are either of them stripped or both have had this before basically comes from waste toner box not being emptied or changed regularly front door is open and closed to fool machine you have mission on hands work carefully you want to reassemble this machine and get it to work properly again good luck buddy
thanks boss
already i open it.
Posting Permissions
Reply With Quote
Bookmarks