How to printing 1200mm long paper i.e banner mode in c6501, what need to done in the machine to activate banner mode in C6501
How to printing 1200mm long paper i.e banner mode in c6501, what need to done in the machine to activate banner mode in C6501
Does it has the large feed trays on the right side of the machine? I think this is only supported threw the bypass tray. Not even sure if this box supports it.
thank, how to print from bypass, is there anything to activate in the m/c, as when we select the paper size in b/p the max size it show is 13x19
Banner printing is not supported on this model. Consult your user manual.
Custom sizes: Maximum 13.0" × 19.2" (330 × 487 mm) to minimum 3.9" × 5.8" (100 × 148 mm).
If you want to do banners, buy a machine that is built to support this. Pretty much every office colour bizhub model above the C350 has banner printing capability. The 6500 and 6501 are production machines, not office models.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
There are 2 more m/c same c6501, which is been installed in different location, they are able to print the Banner i.e 1200mm long print, but in this m/c iam not able, i want to know is there is setting which i need to do, the firmware ver is also latest i.e ver 60.
As far as im aware the machine doesnt support banner printing.
I think you may be mistaken but if you think you are correct then ask the other site how they print on banner paper.
Just looked up paper sizes and they are the same that stirton.m has already posted.
I have found an instruction regarding the 6500/5500, but it may work on the 6501 either:
Banner printing works only with the SMART Version and with the IC408
If a Finisher is attached, you have to remove it, inclusive disconnecting the cables.
Then set Dipsw 10-0 to 1, and 10-1 to 0
Enter your sheets in the bypass, adjust the paper size in the printer driver and strat printing.
Good Luck
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
May i ask what is the "smart version"?
Do you mean the standard setup without all the optional finishers? or are you referring to specific firmware?
ta
SMART version is with the "little" RIP ic 408, with maximum the little paper deck and copy tray or max one finisher.
No special firmware.
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
Bookmarks