Bizhub 250 skew tray 1 / trouble shooting clutches ?

[bsiap]

Replace the transporter clutch.
Clean the 2 little white one way clutch and the axis with sandpaper near the feed rollers.

[fishleg]

Just a quick update. Again thanks massively for all your helps guys I checked everything but it turns out some how the mylar that goes from the bypass and guides the paper into the registration had became jammed under instead of over which is directly inline with tray 1. Tray 2 works as the paper is vertical when it reaches that section so it doesnt even touch it but when it comes from tray one its almost directly inline with the gap thats there hence the catching.

Someone slap me with a fish lol glad it wasnt too hard though .