It works now, thank you
It works now, thank you
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
What does switch 16-3 actually do ? I know 3-7 turns the td sensor off but never heard of 16-3 before.
Cheers,
Mike
Well I have a cracked TDS sensor so after doing a Factory Reset of the copier I had a message that I needed to adjust the TDS sensor even after doing the L-detect.
The 16-3 took care of that message and, even better, now I don't have to do L-detect every time I get a jam or turn off/on the copier.
16-3 trurns off the L detection and 3-7 turns off all error code.
there is no glory without sacrifice
Well this is really good information! So lets recap: He has a machine with a known bad TDS sensor, to make the machine continue to work he has Turned L detect OFF, and disabled ERROR CODE DISPLAY. So now he has a machine with no Toner Control that will continue to run without displaying any warnings. And he thinks this is a good thing!
Let me predict the results: In about 5000 copies his transfer corona will be filled with toner and developer, Toner and dev will be leaking into both paper trays, his drum and blade will be shot from the abrasion of pulling dev. and the fuser will need rebuilding as well. OH he will also have to brake down and replace the TDS and Developer, or just throw the machine away!
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
hahaha that will realy happen to that machine. you want to make it work, even you know that there some parts that need to be replace and time will come evrything will get worse.hehe please dont blame me im just want to answer there question.
there is no glory without sacrifice
So, I am planning to replace the TDS sensor. Once I replace the TDS sensor, clean the developing unit, add developer and go into mode 36 to do the L-detect do I need to do anything in order not to get the "Please adjust L detection" message deleted or should it not occur once the L-detection is done?
I have the same problem.I change The developer,but not new..and i want the old but good conditioned developer to could work.Because we are dealing with 2nd user machines..so any other solution for that without change the Developer please?
Bookmarks