To reset memory to factory defaults, perform the following:
1. Enter the 25 mode (power the machine ON, while pressing the 2 and 5 keys).
2. Select Software SW.
3. Using the up/down arrows, scroll to address 3-4 (All Memory Reset).
4. Select OFF.
5. Power the machine OFF.
6. Enter the 47 mode (turn the machine ON, while pressing the 4 and 7 keys).
7. Enter 9, 2, press the START key, press the STOP/CLEAR key.
8. Enter 0, 9, 6, press the START key, press the STOP/CLEAR key.
9. Enter 0, 9, 3, and press the START key.
10. Power the machine OFF/ON.
Note: When the memory board is initialized, all data is deleted.
Bookmarks