Doing a pm on monday on this machine and for the life of me cant remember the dv setup code in 47 mode and dv counter reset,i know its different on this box then on the 7055/7065 those being in 36 mode hv adj,l-detect any help would be appreciated
Doing a pm on monday on this machine and for the life of me cant remember the dv setup code in 47 mode and dv counter reset,i know its different on this box then on the 7055/7065 those being in 36 mode hv adj,l-detect any help would be appreciated
its 47- 95.
there is no glory without sacrifice
Thank you smiley............does that reset the developer count also?
i dont think so but try to reset it in 25 mode counter reset.
there is no glory without sacrifice
I think that it does reset the dev count but been a long time. 47-018 runs Dmax also. I remember running it after the 47-095. Also run the 095 with the toner tank swung out? I recall that there was a fear that they would add toner during the adjustment and would end up overtoned.
hi ive done even the toner tank is in but you have to clean 1st the toner recycling unit.and i do not put all the dev. but wait until the machine says dis ingage the dev unit and add dev again.until message goes out and the dev are in right amount.
there is no glory without sacrifice
Bookmarks