Sent you a pm as soon as i hear back the info is yours
Sent you a pm as soon as i hear back the info is yours
hello
this is the service manual for ic 408
you will found the way to re- install the software
Hi thank you to all who helped me out!
The machine is working again. But I tried to calibrate the fiery wit color cal and the scanner calibration goes ok but the color calibration give me the following error:
Calibration Error
0x00000024
Measurement page is not detected
I tried also to make an auto gray from the color editor but I got Measurement page is not detected (36) error again.
Any ideas to calibrate the machine? Do you think that is good idea to replace the HDD of the fiery?
you must calibrate the machine with es-1000
no i don't know any on line that you can buy an ES-1000. look at the EFI web site. About Non-UV and UV filter. if you print at too white paper (like mondi) you must have uv filter if you don't buy the other one. my opinion is that the uv filter is better
If you are calibrating the fiery via the copy glass then you need the kodak calibration strip (gray scale). with out it you will get this error.
And Star Trek was just a tv show...yeah right!
When you buy another C6500, if you buys it from a dealer, then you should get a ES-1000 thrown in with the machine.
Please don't ask me for firmware or service manuals as refusal often offends.
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Bookmarks