Copier is jamming with code 3001 2nd transfer. If you open the right side door after the jam the paper will be part of the way through the reg roller and folded at the transfer belt. you will also have part of the image on the transfer roller. When i got their it was jamming every job from all the trays then stopped and started printing fine tested about 100 pages could not get it to jam again. But this was a call back for the same problem the day before and the jam log showed 45 jams all C 3001 but could not recreate the problem. Check all sensor/actuators at the 2nd transport area checks ok.
Bookmarks