Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 29
F 36 1 on Konica 7022
Any body know about it
tanks
claude
-
F36-1: TH1 (fixing temperature sensor 1) high temperature error. This error occurs if TH1 high temperature error signal is detected continuously for at least 1 second.
You can try to reset this error following this procedure:
Enter the "25" mode and set to "0" the bit 1 in DIP SW3.
If error occurs again, check or replace TH1.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks