Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts
    Konica 920 printing w overlay causes code 72-16...


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42

    Konica 920 printing w overlay causes code 72-16...

    We have tested everything.... from clutches to rollers....

    When I print normally, it will print fine - I can print 20K without any issue from any tray.

    When I print a mailmerge, using OVERLAYS - it will print a few from 5-100 then code out with a 72-16 code. When we take off the finsiher the codes moves to 32-01 through 32-04

    We have swaped finishers and fusers. Replaced conveyence clutches, LCT clutches, Replaced the registration clucth.

    Our thinking is the printer prints slightly slower when using overlay, i have 3 other 920s printing overlays without issue. Any ideas will help...

    I have all the manangement docs attached, let me know if you need any other information.

    Will paypal $100 for the correct solution - if its ok with forum...
    Attached Files Attached Files

  2. #2
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    2,067
    Rep Power
    63
    I would check the following between the machines. The firmware versions of the print controller and the image controller. Also do you have the em-701 kit installed?
    And Star Trek was just a tv show...yeah right!

  3. #3
    Field Supervisor 500+ Posts
    Konica 920 printing w overlay causes code 72-16...


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42
    Print controler is maxed out at 512 (1 stick), I dont know if it has the EM-701, where can i check it?

  4. #4
    Field Supervisor 500+ Posts
    Konica 920 printing w overlay causes code 72-16...


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42

    Update: Fixed it for a while

    We swaped HDD1 (which is the copier's HDD) not the print controler and it worked for around 50K clicks, did overlays, 2 page overlays, everything that I needed for.

    Now its back to the same 72-16 code. I really dont get it. Nothing has changed.


    Any advise or what to try next.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here