I replaced yellow developer and SC-45-20 popped up. Fuser is fireing and machine cycle a min then code pops up. Any ideas anyone. Thank you
Thanks: 0
Likes: 0
Dislikes: 0
Minolta Konica C-5500 or IKON CCP-500
I replaced yellow developer and SC-45-20 popped up. Fuser is fireing and machine cycle a min then code pops up. Any ideas anyone. Thank you
Pull out your Yellow Dev unit and make sure it's ok. A 45-20 is a color registration error) I'd be willing to bet your yellow is not working right for some reason.
Color is not 4 times harder... it's 65,000 times harder.They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Hello Rodger,
Rodger that. I made a visual inpection 4 times and rotated he DV unit to make sure here were no binds or unusual abnormalities. The yellow being on top is riding in a drum with a 1/8'' rotational wear mark down to the alluminum. Could the drum charge leak effect this code. I also noticed a piazo type sensor towards the front of the Developer magazine well was dirty. I had brushed and vacuumed this sensor as well. The Dv unit is sitting as the remaining unit and plugged in. I thank you for leading me in the right direction but i am not sure what could have gone wrong in the DV change. Ig you have any other ideas,
please let me know. Once again, I thank youfor your time.
Respectfully, Doran
Reply With Quote
Bookmarks