Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 33
I replaced the whole corona unit. but no result
-
Trusted Tech
50+ Posts
- Rep Power
- 32
I had the same trouble on C451. Fine image on tr. belt but poor quality in the paper. I changed everything ..... finally the parameter board (EEPROM board) was the guilty.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
50ga -911 1 parameter memory board assy
-
Technician
- Rep Power
- 31
mY PROBLEM WITH THIS MACHINE STARTED AND IS NOT YET FIXED WITH A PROBLEM SIMILAR TO YOURS. aFTER SOMETIME STARTED A LOT OF ERRORS C-2803 AND THERE I DISCOVERED THAT A TCR SENSOR ( THE SENSOR YOU FIND IN TO THHE DEVELOPER UNIT) WAS DAMAGED. i`M STILL WAITING A NEW ONE TO SEE THAT SOLVE ALL THE PROBLEMS.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
In case of bad TCR senzor there is no good image on the drum.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks