I am a new member with you
I have a problem in the machine BH- 250
Machine re-operation without the work of
The message also appears to me
See picture
Please help
I am a new member with you
I have a problem in the machine BH- 250
Machine re-operation without the work of
The message also appears to me
See picture
Please help
PROBABLE CAUSES:
1. Failed fax board interfering with operation of MFBS.
Replace fax board kit, FK-503 (Item #4551613).
2. There is a TCP/IP address conflict between the MFP and another device on the network.
Remove the Ethernet cable from the MFP and PING the TCP/IP address. If the PING succeeds, speak with the Network Administrator and resolve the TCP/IP address conflict.
Thanks
I will try to work the steps
before I would order and replace a fax board kit I would initialize the machine. have you tried this>?
brent
I tried to put a new programming
But to no avail
Someone told me I need to change the Main Board
I do not know what is the solution
The problem did not go
The machine is not connected to NetWork
Does anyone has a solution?
Please
why mean 'I tried to put a new programming' firmware ? did you unset fax kit and try or down the new firmware ? if still problem you must change the MFB board.
Could either be mfbs board or NVram. I would try parts from a known good machine if possible...
Did you do a Trouble Reset using the warm reset button?
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
It's a bit difficult to solve this problem. First, try to rewrite the firmware. Then check the PWB-A. Then check the PC drum, is it damage on the edge. I've ever face this your problem Abbas Saeed. I check my bizhub 250 and I found the PC drum damage on the right. After replacing the drum, my bizhub 250 running well.
Thank you all
Finally I know where the problem
The MFB board by the problem
Bookmarks