Thanks:
0
Likes:
0
Dislikes:
0
-
SC53-18 on bizhub 1050 e
Hello
I am a service technician on the bizhub PRO 1050 and can you turn it gives me error SC53-18.I have read in service manual and it tells me The fall-off of the erase lamp (EL)
CN is detected. When turning ON
The Power, an error detection signal
(fall-off) is detected the specified
period of time after the fall-off
detection control signal of the CN EL lamp turns ON.Erase (EL), I can give anyone a solution is urgently for me
-
Re: SC53-18 on bizhub 1050 e
Hello, can be opened in any ICP card Printer Control Board (PRCB). ICPs test to check.
-
Junior Member
- Rep Power
- 0
Re: SC53-18 on bizhub 1050 e
The SC53-18 is consistent with the wire on the main charge unplugged/damaged or the lamp being bad...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks