Thanks:
0
Likes:
0
Dislikes:
0
-
Document Technologies Pro
100+ Posts
- Rep Power
- 34
Bizhub 500 w/ FS510 Finisher; false 10 jams in finisher?
I removed the left end slider cover and inspected sensors. Lots of widgets. manually worked them all. After reassembly it worked until I tested stapled sets and went back to unclearable 10 missfeeds. Any ideas or help with a SM would be greatly appreciated.
-
there are two one way needle bearing gears in the gear cluster just before the exit front side clean them. also hole punch clutch clean or replace
-
Document Technologies Pro
100+ Posts
- Rep Power
- 34
Thanks Mr Clean, They looked ok but I took apart cleaned reassembled and can't get to act up again.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks