c452,552, 652 belt and fuser reset

[masterteknicion]

Does anyone know if these models have the fuse you can replace on the fuser and the belt to reset the electronic counters.

If so where would I find them.

Thanks for your help.

[MR CLEAN OC]

Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.

[tech51]

Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.

Just make sure you have the front door open when you re-set the counters. Doesnt re-set if door is shut.

[masterteknicion]

Thanks for the replies, got it taken care of.

[Printer People]

Fuse no longer needed, reset now available in the tech rep mode for transfer belt and fuser.

Just had the unit apart as i was resetting a C451 at the same time. Put it back in and now trolling through the service mode.....for the life of me i cannot see how I reset the count, I can see the fuser count but can not highlight it to reset it. Am i missing something or in the wrong place.

[Synthohol]

see any box on top in life counter that says new release? if not its too old. you will need a .063A (1/16A fuse)