Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Mar 2010
    Location
    corpus christi, TX
    Posts
    32
    Post Thanks / Like
    Rep Power
    9

    Imaging unit rebuild

    I have several konica minolta c450 bizhubs. Is it possible to rebuild the imaging units?
    I have done some searching for the OCR drums for the c450 IU's but with no luck. Just wondering if anyone had any info.

    Thanks


  2. #2
    Technician
    Join Date
    Mar 2010
    Location
    corpus christi, TX
    Posts
    32
    Post Thanks / Like
    Rep Power
    9
    Sorry ment OPC Drum


  3. #3
    Service Manager 250+ Posts ineo+6501's Avatar
    Join Date
    Mar 2010
    Location
    Newcastle
    Posts
    263
    Post Thanks / Like
    Rep Power
    11
    I haven't managed to find any OPC kits for the C450 either.

    Kits are available for the C250/252/300/352 and are hitty missy with the results.

    I find that if the Drum is OK in a spent unit that has patchy feint copies, pour some fixer from another bad drum unit into the patchy IU (same colour) and that usually sorts the problem out.
    I've had 2-3 chippings of the same IU by using this method, as long as the drum is OK of course.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Posts
    134
    Post Thanks / Like
    Rep Power
    12
    Where have you been buying the opc drums from for the C250,C252 etc we get alot of these in our workshops that just get binned we often open them up to clean the grids. Would be nice to get a hold of a few drums for ones that get mark.

    Cheers,
    Mike


  5. #5
    Service Manager 250+ Posts ineo+6501's Avatar
    Join Date
    Mar 2010
    Location
    Newcastle
    Posts
    263
    Post Thanks / Like
    Rep Power
    11
    Hello Mike,

    I don't know where you are in the world but here in the UK we buy a OPC kit from Katun which includes a drum and DCB. Around 40 each.

    Regards


  6. #6
    Field Supervisor 500+ Posts


    ni311's Avatar
    Join Date
    May 2008
    Posts
    639
    Post Thanks / Like
    Rep Power
    19
    Katun is selling drum unit rebuilding kits for C250 and C350, which is the same with C451 from what I know. Try a search on their website.

    Drum, Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com
    Drum and Toner Chip Reset - http://www.chipreset.eu
    Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •