Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    Apr 2010
    Location
    Napa, California
    Posts
    30
    Rep Power
    29

    Konica 1050e SC70-01 on FS503

    I have a Konica Minolta 1050e with both the FS503 and a Perfect binder that I alternate on and off with.
    The problem started with the stapler not finishing its cycle and stopping with the head jammed down on the paper after the set was stapled. That problem got worse with the paper intermittently not traveling through to the stapling position. Now the problem is that the "Finisher is now operating" won't go away.
    Also in the adjustments mode from the operator panel when the finisher adjustment is selected the system immediately displays an error SC70-01. Any suggections?

    Thanks,

    Copy Corner

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jan 2008
    Location
    derbyshire
    Posts
    50
    Rep Power
    33
    check the conections of :
    FD-501 control board (15AG-9310)
    Main body I/F wiring (15AG90320)
    SD-501 control board (15AN-9310)
    FSN I/F wiring (15AN90020)
    in my case the sd-501 control caused this but any of the above either faulty or just poor conection can cause this


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here