Thanks: 0
Likes: 0
Dislikes: 0
connection in Di 470 using fiery Pi5500
hello guys can somebody help me on how to connect my machine DI 470 or DI 450 in fiery PI 5500 cause it said on the guide manual that i downloaded only windows 98 up to nt the OS that i can be use, but i need the windows XP, PLEASE! PLEASE! guys i need your help and sir/mam if you have an instruction much better and it would be great helpfull to me. thank you very much in advance....wait for all your reply guys!!!
IF you look in network neighborhood do you see it listed?
You can also install it using the generic PS or PCL driver (HP LJ 4)
Color is not 4 times harder... it's 65,000 times harder.They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
The drivers are available from the Konica Minolta website (well the Australian one for sure). You should download and install those drivers for XP.
Please don't ask me for firmware or service manuals as refusal often offends.
it was listed, actually heres the story i connect the fiery Pi5500 to the copier di 470 and then from my laptop to the fiery Pi5500 connection using cross cable then set up ip address, driver,ping etc. after that when i print nothing happend the ip address is right coz when i ping it it replys to my laptop. my be the driver not supported the xp os?what do u think guys?Originally Posted by RRodgers
thanx, but i tried to find in konica website but only bizhub was there? anyway i will try again
Search for Pi5500 NOT Di470.
Hans
Ah ic i didnt think about that,thanks a lot ken more power!
And also to all guys who made a response to my problem thank u all! Mabuhay!
Reply With Quote
Bookmarks