bizhub c353 won't print from windows 7

KalispellTech · 04-22-2010

I have a remote client on a Peer to Peer network. His XP and Vista PC's print with no issues. Using the Windows 7 driver downloaded from Konica, his two Windows 7 64bit PC's will send a print signal to the printer which will blink it's data light a couple times and then do nothing. No failed print indication on the PC's, the job has left the print spool, just no completed print or attempt to print on the BizHub. Any ideas?

**copytechman** · 04-22-2010

What version firmware is in the machine? If it's too far out of sync then the machine may not print (newer driver / older firmware). Had a c280 do that to me recently.

Regards!
A.

KalispellTech · 04-22-2010

I'm much more a server admin than a printer tech. I see multible ROM versions, what is it that I'm looking for?

**copytechman** · 04-22-2010

Mfp controller primarily, it'll be a 2 character combination.. example follows: A02E0Y0-0100-G00-R5. The last 2 characters are the main version for the mfp board. Major revisions started @ 21 (here in Canada anyway), 62, 78, 88, j8, r5 and r6 (which is the current flavour, but r5 is pretty much identical for the most part)..

Regards!
A.

**Mr Spock** · 04-22-2010

job list
job list details
print history and view error job

**Darren King** · 04-22-2010

We have had luck using the Vista 64 bit driver when the 7 driver gives us trouble.
Hope this helps
Darren

**emujo** · 04-22-2010

Go into admin mode, printer settings and turn on print post script errors, if it is this type of error you will get a printout with the exact error. Also, as Mr Spock posted, from the control panel you can see why the job failed. Could also be a user authentication/account track setting issue if this is enabled. Emujo

**BIG PAPA** · 04-22-2010

What does show up in the job list? Are they using account track or user Auth? If that is turned on and not set up in driver machine will receive the job and just delete it, but it will show in job list history.