Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: BizHub 600

  1. #11
    Technician
    Join Date
    May 2015
    Posts
    42
    Rep Power
    18

    Re: BizHub 600

    I have a badluck with Bizhub 600.. 2 Days ago i given my Bizhub 600 in scrap after just 18,000 copies i printed. It was keep on "Now warming Up" but never beed "Ready to copy"

    Tried almost 5-6 High knowledge mechanics but no one was able to solve the issue so given the machine in scrap to release my tensions

  2. #12
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Re: BizHub 600

    Quote Originally Posted by rizwan143 View Post
    I have a badluck with Bizhub 600.. 2 Days ago i given my Bizhub 600 in scrap after just 18,000 copies i printed. It was keep on "Now warming Up" but never beed "Ready to copy"

    Tried almost 5-6 High knowledge mechanics but no one was able to solve the issue so given the machine in scrap to release my tensions

    Are you sure they were really high knowledge mechanics? I've seen this many times as have many people here I'm sure. It's never cause for machine disposal - though that is an old machine now anyway.

  3. #13
    Technician
    Join Date
    May 2015
    Posts
    42
    Rep Power
    18

    Re: BizHub 600

    Quote Originally Posted by EarthKmTech View Post
    Are you sure they were really high knowledge mechanics? I've seen this many times as have many people here I'm sure. It's never cause for machine disposal - though that is an old machine now anyway.
    Yes they are.. Because Alot of parts was replaced by every mechanic & after just 5-10 copies the fault came again causing a huge loss too.

    Changed 2 times PRCB

  4. #14
    Senior Tech 100+ Posts
    BizHub 600


    Join Date
    Aug 2009
    Location
    Montrose, Calif.
    Posts
    174
    Rep Power
    31

    Re: BizHub 600

    CF cards (2) reflashed from base or replace the drum toner sensor wouldve fixed it for sure!

  5. #15
    Senior Tech 100+ Posts
    Join Date
    Aug 2007
    Posts
    174
    Rep Power
    35

    Re: BizHub 600

    If the cards are bad - either order new ones or copy information from another 600 that is working ok. You will obviously need to enter serial number, etc and make whatever changes on options, etc.

  6. #16
    Junior Member mmtshina's Avatar
    Join Date
    Sep 2015
    Location
    Bulawayo
    Posts
    9
    Rep Power
    0

    Cool Re: BizHub 600

    some times it could be the sub-power switch , try testing t

  7. #17
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: BizHub 600

    Just a tip. Don't delete the files from the CF card with windows, it creates a recycle bin file that screws it up.
    Cut and paste somewhere else.

    With the right disk tool you can format it. Think its Xfat.
    Whatever

  8. #18
    Senior Tech 100+ Posts
    Join Date
    Aug 2007
    Posts
    174
    Rep Power
    35

    Re: BizHub 600

    You dont need any special firmware to delete the files. Just cut the files and replace with new files. Go to another BZ600 that is working and copy files from them. Much cheaper to just buy new cards and copy that information and store on hard drive in case another machine has similar problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here