Thanks:
0
Likes:
0
Dislikes:
0
-
Bizhub C500 - random error code SC 27-01, 27-02, 27-03, 27-04 and 21-01
Hi,
I'm having the following strange problem with my copier, Bizhub C500: when it starts (power-up) randomly shows SC 27-01 or 27-02 or 27-03 or 27-04 error codes. When I try entering into 36 mode, it displays SC 21-01 error code. Therefore I cannot service properly.
Any ideas (I can't change the PCRB with another one because I don't have such spare part)?
Thanks in advance.
-
Nothing?
-
Check the installation of the charge coronas one is not seated correctly
-
Senior Tech
100+ Posts
- Rep Power
- 28
Re: Bizhub C500 - random error code SC 27-01, 27-02, 27-03, 27-04 and 21-01
I am bringing up this old thread because of a KM C-500 SC 27-03. The post above by a field supervisor says a corona wire may not be seated properly. But the service manual says that the cyan unit toner density sensor is not sending information. Which is it? Thank you. BTW--I am not a trusted tech. I don't know why it says that next to my name.
-
Senior Tech
100+ Posts
- Rep Power
- 28
Re: Bizhub C500 - random error code SC 27-01, 27-02, 27-03, 27-04 and 21-01
I have resolved the error I referenced. Toner density sensor is the correct answer.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks