Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Toner Schlep 100+ Posts pspahr's Avatar
    Join Date
    May 2008
    Location
    Hendersonville, NC
    Posts
    227
    Rep Power
    35

    Fiery Calibration issue

    Hello all. I was hoping someone could give me some help with a calibration issue with a Fiery 3XETY on the back of an Ikon CPP650. The customer has the ES1000 densitometer and up until yesterday calibrating using that unit worked well. Currently, though, it is not working at all. The site uses Mac only with OSX updated to Snow leopard. Opening CWS5 and clicking on Calibration issues the following error: The service Calibrator is currently used by "Operator".

    I connected my laptop running XP and connected the densitometer to it, opened CWS5 and tried the calibration with the same result. I shut down the Fiery, restarted it, rebooted it, cleared the server, did everything I could think of other than re-isntall the sys software. Any ideas other than software re-install would be greatly appreciated.

    I feel it certainly resides in the Fiery server or the densitometer, not CWS5 or any of the workstations as later that day I successfully calibrated an identical machine at another location with their densitometer and my laptop. That leaves the Fiery and the es1000. Barring other ideas from the rest of you my next step is to borrow the other's densitometer to test at the problem location.

    Thanks for any assistance.
    VectorLinux---Check it out!

  2. #2
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,949
    Rep Power
    126
    Although I don't remember a patch for this problem, does the Fiery have all the latest and greatest updates?

    Make sure you use the latest version of CWS5; it's been updated several times, and substantial fixes were added each time. You can freely download it from EFI.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

  3. #3
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56
    Yeah I'm thinking patch. Can you do a calibration from the glass with the Kodak strips at all?
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  4. #4
    Field Supervisor 1,000+ Posts
    Fiery Calibration issue

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62
    In Command Workstation, are you logging in as the Administrator or one of the other users?

    If you want to test the ES-1000, you can download some software call Eye-One (from memory that is what it is called) and test your ES-1000 with that. You should still be able to download this from the GretagMacbeth website (the makers of the ES-1000).
    Please don't ask me for firmware or service manuals as refusal often offends.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here