Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Fiery x3eTY2

  1. #11
    copydude
    Guest
    Thanks to Neil and his Iso's I was able to get it reloaded and Upgraded! Now awaiting Toner (Tuesday) anyone know how to bypass the Need toner light so I can at least scan? Also the dates and what no are out of wack.. do I just hook up a monitor and keyboard and go in and make the changes.. the interface with the copier is limiting!

  2. #12
    Biggaz
    Guest

    Re: Fiery x3eTY2

    I have exactly the same problem as copydude. I have the disk for the ethernet install but I cannot get it to start, it says I have to move the dip switches to service but I cannot find these switches any where. with the case open there are a few jumper connections at the bottom of the board but I would be a fool to change them without know exatcly what they are.


    If anyone can help with files for the usb installer or help me with setting up the ethernet install I would be really greatful.

  3. #13
    Biggaz
    Guest

    Re: Fiery x3eTY2

    I found the service manual on another post and it pointed out where they were. (on the top next to the Number display, under a cleverly coloured bit of camouflage tape!)

    The install all went fine and we are back up and running!

  4. #14
    Moosi
    Guest

    Re: Fiery x3eTY2

    I have the same Problems. Can please someone help me with the Software.

    thx a lot

  5. #15
    Certified Konica Expert 2,500+ Posts
    Fiery x3eTY2

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: Fiery x3eTY2

    easy install. i do by lan cable.
    i open the .ISO with a virtual DVD (powerISO) app, flip the 2 switches on the fiery, plug the lan cable to my laptop and the copier port and run the install from the "DVD"
    simple. as long as the HDD is good it works every time.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  6. #16
    Moosi
    Guest

    Re: Fiery x3eTY2

    Thx for your help. I can‘t find my dvds. Can you help me with the Software? A diwnloadlink would be great.

  7. #17
    Certified Konica Expert 2,500+ Posts
    Fiery x3eTY2

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: Fiery x3eTY2

    Quote Originally Posted by Moosi View Post
    Can you help me with the Software? A download link would be great.
    not to sound like a dick but a donation to this site would also be great

    the Fiery is an IC-??
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here